超大通孔徑氣動夾頭,內藏氣壓缸.適合管材加工。

夾頭內建有"壓力檢知"機構，能檢知夾頭內部壓力遽降，確保操作安全。

專利注氣系統,安裝快速容易,無傳統注氣密封環損耗問題,可節省安裝及維修成本。

夾頭內建有"夾持檢知"機構，能避免夾爪于快速位移行程中夾持工件，進而導致內部零件損壞或工件飛脫所設計之機構。 (只適用于外徑夾持)。

兩段式行程，可節省夾持所需要時間。

注意:快速行程階段無法提供足夠之夾持力。

Large through-hole 3-jaw power chuck with build in air cylinder.

With build-in "pressure detection" device which can check the rapidly decreasing pressure within the chuck, guarantee to the security when operating.

Patented air supply system, it is easy to install and maintain. No abrasion issue of traditional sealed ring. Maintenance cost and time can be saved.

The build-in "clamping detection" device can avoid jaws clamping the workpiece during the rapid stroke stage. This mechanism can also prevent causing the damage of the internal parts or flying out of workpiece.(only for external clamping).

Extended jaw stroke design can shorten the processing time when gripping.

Notice: No clamping in rapid stroke period.

尺寸單位/Size unit: mm