類型：鎢鋼系列，回定式
Type: Tungsten carbide series,Dead centers type

適 用：CNC車床及其他機床。

Application: CNC lathe and other lathe

用 途：適用尾座回轉型結構設計使用(細長型車削加工)。

Working Usage: Applicable for rotary structure of tailstock, and slender workpiece turning process

結 構：採用合金鋼材，經熱處理硬度達57°-60°，精密研磨製成。

Structure: Made of alloy steel and hardened to HRC 57-60, precision ground, adopted the tungsten carbide steel from the USA, which is high wear resistance. the  welding depth is 20mm,strong rigidity and better stability.

特 點：採用美國進口鎢鋼原料製成，不易磨損，鎢鋼焊接20mm深、剛性強、穩定性佳。

Advantage: Adopted the tungsten material imported from the US, which is wear resisting, the welding depth of tungsten reach 20mm, strong rigidity, good stability.

配 件：Y型扳手

Accessories: Y type spanner

精準度：0.002以內

TIR: Less than 0.002mm

檢測頂尖的尖部跳動精度時，必須在頂尖頂緊工件的狀態下進行打表。

Inspecting the run out accuracy of the center tip must be under the status of holding the workbar tightly.

規格 / Specification   單位/ UNIT：mm

型式/外表尺寸 Model/Spec	A	B	C	D	D1	d	G	L	?
TSC-9663-TS06-3A	60	75	8	53	24.1	6	23.825（MT3)	162	60゜
TSC-9663-TS08-3A	60	75	8	53	24.1	8	23.825（MT3)	162	60゜
TSC-9663-TS10-3A	60	75	8	53	24.1	10	23.825（MT3)	162	60゜
TSC-9663-TS16-3A	60	75	8	53	24.1	16	23.825（MT3)	162	60゜
TSC-9663-TS06-4A	65	85	9	68	31.6	6	31.267（MT4)	193	60゜
TSC-9663-TS08-4A	65	85	9	68	31.6	8	31.267（MT4)	193	60゜
TSC-9663-TS10-4A	65	85	9	68	31.6	10	31.267（MT4)	193	60゜
TSC-9663-TS16-4A	65	85	9	68	31.6	16	31.267（MT4)	193	60゜

非標需求可定制  Customized order can be accepted.
保留技術更改的權利  Subject to technical changes.

配件詳情頁/Accessories Page
頂尖技術要點與使用說明/Center technical user manual